S-Series 5:

Two- way full port ball valve; Body, ball, stem, and end fitting material shall be 316 stainless steel, Hastelloy C-276, Carbon Steel, Hastelloy C-22, bronze alloy 922, or other. Valve shall be three-piece “ swing-out” body design. Seats and seals shall be TFM®- PTFE material and provide both upstream and downstream bubbletight seal and be adjustable for in-line we a r. Stem packing shall be live loaded TFM®-PTFE material. For manual valves, handle shall be 300 series stainless steel. Body bolts and nuts shall be 18-8 stainless steel. Maximum working pressure to be 720 psig and full vacuum. Valves shall be non-firesafe design unless otherwise specified. For fire rated valves to API 607 Ed 4, sizes 1/2” – 3”, designate Series 6 (see section “ fire rated”). To add automation and controls, see section “Automation and Controls”.

PBM Model number SP(material)-(size)5(end connection)

SD Series 5:

Two- way full port steam ball valve; Body, ball, stem, and end fitting material shall be 316 stainless steel, Hastelloy C-276, Carbon Steel, Hastelloy C-22, bronze alloy 922, or other. Valve shall be three-piece “ swing-out” body Seats shall be TFM®-PTFE with EPR O-ring energizer. Seats shall have stainless steel encapsulation on ID, provide both upstream and downstream bubbletight seal and be adjustable for in-line wear. Stem packing shall be live loaded white TFM®-PTFE. Body seal shall be EPR o-rings with white TFM®- PTFE back up seal. Optional 300 Series s/s 2” stem extension for 4” thick installation. Valves shall not require disassembly for buttwelding. Body bolts, nuts, and belleville washers shall be 18-8 stainless steel. Body bolts shall be live-loaded with belleville washers. Maximum working pressure to be 720 PSIG and full vacuum. Valves shall be a non-firesafe design. To add automation and controls, see section “Automation and Controls”. PBM Model number SD(material)-(size)5(end connection)