Forged Valves

SI-Series 8 (1/2” through 4”, DIN 11850 DN 8 through DN 100, ISO 1127 DN 8 through DN 80) PBM’s Forged IGENIX® Sanitary Series 8, “True Bore®” ball valve with port through ball, seats, and end fittings same as ID of tubing. Forged 316 L stainless steel body and end fittings per ASTM A182F316L/DIN 1.4404, wrought or forged 316L ball and stem, less than 1% ferrite, three piece swing-out valve design. Seats and seals shall be white TFM™. Seats shall provide both upstream and downstream bubble-tight seal and be adjustable for in-line wear. Stem packing shall be live loaded white TFM™ and S-TEF® material. End fittings shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connecting tubing and have a controlled sulfur content of 0.005% through 0.017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8 stainless steel. Interior surfaces shall be 20 RA or better with optional electropolish and finer mechanical finishes. Valve shall have integral mounting pad to allow adaptation to ISO 5211 for direct mount automation. All materials are FDA and USP23 Class VI compliant. Maximum working pressure to be 720 PSIG and full vacuum.

Cast Valves

SI-Series 9 (1/2” through 6”, DIN 11850 DN 8 through DN 150, ISO 1127 DN 8 through DN 100) PBM’s IGENIX® Sanitary Series 9 “True Bore®” ball valve with port through ball, seats, and end fittings same as ID of tubing. Type (316 L stainless steel with less than 2% ferrite, , hastelloy C-276 or C22, or other) body, ball, stem, and end fittings, three piece swing-out valve design. Seats and seals shall be combined “cartridge” and be white TFM®. Seats shall provide both upstream and downstream bubble-tight seal and be adjustable for in-line wear. Stem packing shall be live loaded white TFM® or S-TEF™ material. End fittings shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connecting tubing and have a controlled sulfur content of .005% through .017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8 stainless steel. I.D. and O.D. surface finish shall be the same as specified for tubing. Maximum working pressure to be 400 PSIG and full vacuum. Valves shall be nonfire rated design unless otherwise specified.