F-Series 5:

Flush tank bottom ball valve; Body, ball, stem, and end fitting material shall be 316 stainless steel, Hastelloy C-276, Carbon Steel, Hastelloy C-22, or other. Weld pad shall be 316L grade stainless steel (or other) material (specify). Valve shall be three-piece “swing-out” body design. Seats and seals shall be TFM®-PTFE material and provide both upstream and downstream bubbletight seal and be adjustable for in-line wear. Stem packing shall be live loaded TFM®-PTFE material. For manual valves, handle shall be 300 series stainless steel. Body bolts and nuts shall be 18-8 stainless steel. Valves shall be non-firesafe design unless otherwise specified. For fire rated valves to API 607 Ed 4, sizes 1/2” – 3”, designate Series 6. To add automation and controls, see last section.

PBM Model number FT(material)-(size)5(end connection)

AF Series 1:

Angle stem flush tank bottom ball valve. Body, ball, stem, and end fitting material shall be 316 stainless steel, Hastelloy C-276, Hastelloy C-22, or other. Weld pad shall be 316L grade stainless steel (or other) material (specify). Valve shall be two-piece design. Seats and seals shall be RTFE material and provide both upstream and downstream bubbletight seal and be adjustable for in-line wear. Stem packing shall be live loaded RTFE material. For manual valves, handle shall be 300 series stainless steel. Body bolts and nuts shall be 18-8 stainless steel. Valves shall be non-firesafe design unless otherwise specified. For fire rated valves to API 607 Ed 4, sizes – 1” – 6”, designate Series 3. To add automation and controls, see last section.

PBM Model number AF(material)-(size)-1-(end connection)