DI-Series 9, 3-Way Diverter Port ball valve:

“True Bore®” diverter port ball valve with port through ball, seats and end fitting same as ID of tubing. Type (316L stainless steel with less than 2% ferrite, hastelloy C-276 or C22, or other) body, ball, stem, and end fittings, three piece swing-out valve design. Seats and seals shall be combined “cartridge” and be white TFM™. Seats shall provide both upstream and downstream bubbletight seal and be adjustable for in-line wear. Stem packing shall be live loaded white TFM™ or S-TEF® material. End fittings shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connecting tubing and have a controlled sulfur content of .005% through .017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8 stainless steel. I.D. and O.D. surface finish shall be the same as specified for tubing. Maximum working pressure to be 400 PSIG and full vacuum. Valves shall be non-fire rated design. To add automation and controls, see section “Automation and controls”.

PBM Model number DI(material)-(size)9(end connection) – (flow pattern)