3, 4, & 5-Way Multi-Port Valves

You are here


PBM's 3, 4 and 5-way Multi-Port valves are true multi-port valves with seals at every port. This design makes the multi-port ideal for flow switching operations. In some applications, this valve can replace as many as four ordinary 2-way valves, with corresponding savings in piping and fittings. 




  • Sizes 1/2” – 4
  • Materials: 316/316L, Hastelloy™, Titanium or others; Series 1 only – Ductile Iron and Bronze
  • End Connections: Buttweld, Flange, NPT, Socket Weld or others
  • Standard V-TEF™ seats / seals
  • Valves shall have 4 or 5 V-TEF™ or S-TEF® seats and seals.
  • Working Pressures: up to 275 psig depending on temperatures
  • Temperature Range: up to 450˚F (232.2˚C), depending on seat and seal material
  • Cv Values (gpm): 5.4 to 613 depending on end connection*
  • Valves are rated for full vacuum.
  • Stainless steel brackets are strong, durable and corrosion resistant to facilitate wash-down.
  • Choose from 4-way and 5-way flow patterns available offering for 90˚, 180˚ and 360˚ operation
  • Compact, low profile design facilitates installation in areas with tight space restrictions.
  • Stem assembly accommodates PBM Direct Mount Actuation for accurate alignment and increased cycling life.


  • Optional body cavity fillers minimize areas where media could become trapped and contaminate the process.
  • Full range of automation and controls.


    *Note:Cv is defined as the number of U.S. gallons of water per minute, at ambient temperature, that will flow through a valve at 1 psi pressure drop.


PBM (Pittsburgh Brass Manufacturing) is a  company over 100 years old that began as a non-ferrous foundry in 1899 along the Monongahela River in Pittsburgh.



  • Address: 1070 Sandy Hill Road,
       Irwin, PA 15642
  • Phone: 724-863-0550 / 800-967-4PBM
  • Email: info@pbmvalve.com








SSL Certificates