3-Way Diverter Port Valve

You are here

Description

PBM's 3-Way Divertor Port valves can be an economical alternative to a 3-Way Multi-Port valve depending on the sealing requirements. A single Diverter Port can replace two or three 2-Way valves to reduce cost and space. They are an excellent choice for mounting two relief valves from a common pressure source. 


Downloads

PRODUCT OVERVIEW

  • Sizes 1/2" – 6”
  • Materials: 316/316L Stainless Steel, Hastelloy®, others
  • End Connections: Buttweld, Flange, NPT, Socket Weld or others
  • Standard V-TEF™ - PTFE or S-TEF® seats / seals
  • Working Pressures:  up to 900 psig (62.1 bar) depending on valve series, size and temperatures
  • Temperature Range:  up to 450˚F (232.2˚C), depending on seat and seal material
  • Cv Values (gpm):  5.2 to 1,860 depending on port and end connection*
  • Valves are rated for full vacuum.
  • Valves shall be a non-firesafe design unless specified.

OPTIONS

  • Available in (9) flow patterns
  • Optional body cavity fillers minimize areas where media could become trapped and contaminate the process.
  • Full Range of Automation and Controls

About

PBM (Pittsburgh Brass Manufacturing) is a  company over 100 years old that began as a non-ferrous foundry in 1899 along the Monongahela River in Pittsburgh.

 

GET IN TOUCH

  • Address: 1070 Sandy Hill Road,
       Irwin, PA 15642
  • Phone: 724-863-0550 / 800-967-4PBM
  • Email: info@pbmvalve.com

 

 

 

 

 

 

 

SSL Certificates