3-Way Diverter Port Valves
Description
PBM's 3-Way Divertor Port valves can be an economical alternative to a 3-Way Multi-Port valve depending on the sealing requirements. A single Diverter Port can replace two or three 2-Way valves to reduce cost and space. They are an excellent choice for mounting two relief valves from a common pressure source.
Downloads
PRODUCT OVERVIEW
- Sizes 1/2" – 6”
- Materials: 316L, low ferrite cast and forged, Hastelloy™, others
- End Connections: Extended tube and hygienic clamp, others
- Standard V-TEF™ or S-TEF® seats / seals
- Working Pressures: up to 900 psig (62.1 bar) depending on valve series, size and temperatures
- Temperature Range: up to 450˚F (232.2˚C), depending on seat and seal material
- Cv Values (gpm): 3.0 to 1,750 depending on port and end connection*
- ASME BPE Compliant
- Valves are rated for full vacuum.
- Variety of mechanical polish finishes as well as electropolish
- US, DIN, & ISO True-Bore® Port Diameters
- USP Class VI elastomers and FDA complaint materials available
- Certified Material Test Reports (CMTRS) provided for wetted components
OPTIONS
- Available in (9) flow patterns
- Optional body cavity fillers minimize areas where media could become trapped and contaminate the process.
- Full Range of Automation and Controls
About
PBM (Pittsburgh Brass Manufacturing) is a company over 100 years old that began as a non-ferrous foundry in 1899 along the Monongahela River in Pittsburgh.
GET IN TOUCH
- Address: 1070 Sandy Hill Road,
Irwin, PA 15642 - Phone: 724-863-0550 / 800-967-4PBM
- Email: info@pbmvalve.com
